Life Support Products AutoVent 3000 Transport Ventilator

Specifications

• Supply Pressure Range: 40 – 60 psig.
• Gas Consumption Driving Gas: 0.5 lpm maximum.
• Operating Temperature: 0 to 125 °F.
• Storage Temperature: -40 to 160 °F.
• Shipping Weight: 5.75 lb (2.6 kg).
• Shipping Dimensions: 15″ x 12″ x 9″ (38 cm x 30.5 cm x 23 cm).

Control Module:

• Weight: 24 oz. (680 grams).
• Dimensions: 1.75″ (D) x 6″ (W) x 3.5″ (H) (4.4 cm x 15.24 cm x 8.9 cm).
• Frequency: 8 to 28 BPM.
• Tidal Volume: 200 to 1200 ml.
• Flow Rate: 16 to 48 lpm.
• Inspiratory Time: Approximately 0.75, 1.5, or 2.0 seconds.
• Expiratory Time: 1.5 to 6.0 seconds.
• I-E Ratio: 1:1 to 1:4.
• Case Material: Polyester.
• Input Connection: Plated brass.
• Output Connection: Plated brass.
• Minute Volume: 0 to 24 lpm.
• Driving Gas: 0.5 lpm maximum.

Patient Valve Assembly:

• Weight: 16 oz. (450 g).
• Flow: 0 – 48 lpm at 50 psig (as required in demand mode).
• Peak Inspiratory Flow: 48 lpm at an airway pressure drop of less than 2.5 cm H₂O.
• Delivery Pressure: 60 +/- 5 cm H₂O.
• (Insp.) Crack Pressure: 0 to -2 cm H₂O (0 to -0.8″ H₂O).
• Exhalation Resistance:
  • 0 – 10 lpm: 1.5 cm H₂O (max).
  • 11 – 70 lpm: 3.8 cm H₂O (max).
• Dead Space: 8 ml (excluding mask).
• Inlet Fitting: Standard male oxygen DISS.
• Filter: 25 micron stainless steel mesh.
• Outlet: 22 mm outside diameter x 15 mm inside diameter (fits standard medical masks, endotracheal tubes, and tracheostomy tubes).
• Materials:
  • Body – anodized aluminum.
  • Cover – polycarbonate.
  • Outlet fitting – polycarbonate.
  • Inlet fitting – plated brass.