General Laboratory
Showing 1–24 of 46 results
-
General Laboratory
Measuring Cylinder, TPX Class “A”
- These transparent graduated cylinders have excellent value.
- Moulded-in large, neat and easy to read graduations.
- Hexagonal shape gives stability to the base.
- Cylinders have generous pour spout for smooth flow of liquid during pouring.
- Meet accuracy requirements of class A under “DIN 12681/ISO 6706”.
SKU: MP71349 -
General Laboratory
Double Ended Magnetic Stirrer Bars, PTFE/ALNICO V MAGNET
- Double ended stirrer bars have double paddle action for efficient stirring plus high stability.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71315 -
-
General Laboratory
Slide Box, ABS
- These Slide Box are suitable for holding standard 25 x 75 mm microscope slides.
- Slide tray are mounted with cock sheet on the bottom and index list inside the lid for microscope slide identification.
- Uniform grooved slide slots seperates slides and prevents it to come in contact with each other.
SKU: MP71335 -
General Laboratory
Burette Clamp, PP
• Burette clamps are used to hold burettes, test tubes, etc.
• Completely corrosion proof as it is moulded in polypropylene.
• Spring-loaded jack in the middle provides grip to the burette and prevents it from slipping.
• Two tapered wedges are provided to ensure firm grip on the rods.
• Available in both single and double clamp.
SKU: MP71323 -
General Laboratory
Oval Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Best suited for round bottom flask.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71316 -
-
General Laboratory
Conical Flask, PP
• Moulded from high quality virgin Polypropylene to ensure excellent results.
• These Conical Flasks are used for routine storage and pouring applications in the laboratory.
• These Flasks have a screw cap designed with inner thread for superior sealing and better security.
SKU: MP71337 -
-
General Laboratory
Vacuum Guage Round / Cubic Desiccator
• These vacuum desiccators feature a round design with light weight yet high tensile strength.
• Maximum vacuum of 1 Torr (1.33 x 10-4 Mpa) for 72 hours.
• High quality silicone gasket ensures greaseless airtight seal for cost effective and clean test environment.
• Highly transparent, shatterproof, non-corrosive, and easy to clean polycarbonate construction.
SKU: MP71321 -
General Laboratory
Dual Purpose Scoop, HDPE
- ABDOS Dual purpose Scoop is designed to combine the function of a scoop, weigh boat, and funnel to make this product economically beneficial.
- These Scoops are made from high quality anti-static polystyrene that is waterproof and reduces the probability of materials sticking to the scoop.
- These scoops have locking tabs that help to retain materials.
- These scoops can withstand powders, gels, and semi-solids.
- The broad tip design keeps the scoop stable while on the scale and enables materials to be easily scooped and dispensed.
SKU: MP71339 -
-
General Laboratory
Separatory Funnel, PP
- ABDOS Separatory funnel is moulded from high quality virgin Polypropylene to ensure excellent clarity and strength.
- This Funnel is pear shaped and has screw cap for superior sealing and leak proof.
- This funnel comes with PTFE plug for easy usage.
- Push Fit Plugs make the assembly easy and convenient.
SKU: MP71345 -
General Laboratory
Coplin Jar
- These Coplin Jars are Polypropylene staining jars that holds either5 single or 10 back to back standard 75 x 25 mm slides.
- Interior of the Coplin Jar Is groved to hold the slides in an upright position.
- Flat Cap, features large milled edge for easy hand grip and has a built-in plug seal.
SKU: MP71329 -
General Laboratory
Wings Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Best suited for test tubes.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures upto 260°C.
SKU: MP71318 -
-
General Laboratory
Magnetic Stirrer Bar With Pivot Ring, PTFE/ALNICO V MAGNET
- Central pivot ring ensures efficient spinning even on curved or uneven bases.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71314 -
General Laboratory
Drying Rack, SS
- These Drying Racks are used for draining and drying test tubes, beakers, flasks & other labware.
- There are 55 pegs in the rack, 50 smaller pegs for products with small diameter & 5 large brackets are designed to hold Erlenmeyer flasks, beakers, etc.
- These pegs are plastic coated for better protection.
- The racks come with a tray at the bottom in order to avoid drops on the surface or table.
SKU: MP71320 -
General Laboratory
Triangular Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Ideal for mixing difficult solutions e.g. dissolving solvents or mixing sediments.
- Spins well giving the best possible mixing action.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71309 -
General Laboratory
Microscope Slide File, HIPS
- These Slide File will hold upto 20 standard microscope slides 25 x 75 mm.
- These slide file is made of two parts the base is holding the slides horizontally in prenumbered spaces for easy identification and transparent door which can either cover the slides and allow easy reading of ID labels with or without optical bar code reader.
SKU: MP71332 -
General Laboratory
Weighing Boats, PS
- Abdos weighing boats are flexible with smooth surfaces to provide accurate pour-outs with minimal sample loss.
- Biologically inert and resistant to dilute weak acids, aqueous solutions, alcohols, and bases.
- All Abdos weighing boats are anti-static and facilitate the weighing of the static-affected sample.
- These boats can withstand temperature between 10°C to 70°C.
- Can be used with microwave moisture analysers.
SKU: MP71350 -
General Laboratory
Volumetric flask. TPX, Class A
- These Volumetric Flasks are manufactured from the medical grade TPX polymer conforming to 21 CFR free of heavy metal and natural rubber.
- These Flasks are made from Glass like TPX offering excellent clarity.
- These Volumetric Flask Come with polypropylene stopper.
- Meet accuracy requirements of class A under “ISO 1042”.
SKU: MP71346