General Laboratory
Showing 1–24 of 46 results
-
General Laboratory
Weighing Boats, PS
- Abdos weighing boats are flexible with smooth surfaces to provide accurate pour-outs with minimal sample loss.
- Biologically inert and resistant to dilute weak acids, aqueous solutions, alcohols, and bases.
- All Abdos weighing boats are anti-static and facilitate the weighing of the static-affected sample.
- These boats can withstand temperature between 10°C to 70°C.
- Can be used with microwave moisture analysers.
SKU: MP71350 -
General Laboratory
Octagonal Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
• Shape gives increased turbulence at low speeds.
• Bars with central pivot ring.
• For the stirring of liquids on magnetic stirrers and hot plates stirrers.
• Strong alloy magnets sheathed in pure white inert PTFE.
• Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71312 -
-
General Laboratory
Assorted Workstation storage Bin, ACRYLIC
• Users can organize most of their commonly used laboratory disposables in one location.
• First section of the bins can be used to store tubes, vials, pipette tips, hair cap or masks.
• Second section of the bin is used to store and dispense tissue paper, kimwipes and Parafilm M (supplied with super-sharp serrated blade).
• Third section of the bin is used to store and dispense gloves.
SKU: MP71324 -
General Laboratory
Spatula, PP
- Abdos Spatula is moulded in polypropylene.
- Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
- The edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from containers.
- Suitable for use with food.
SKU: MP71347 -
General Laboratory
Cross-spin Magnetic Stirrer Bars, PTFE/ALNICO V MAGNET
- Cross spin stirrer bars add speed and efficiency to your mixing requirements.
- The cross shape creates a deep vortex and provides stable and quite operation.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71319 -
-
General Laboratory
Retort Stand, PP/PE Coated Rod
- Retort stand is used to attach clamp that holds test tubes and other equipment like burettes.
- It is used for titration, distillation and filtering of samples.
- It is available in both central and side holes.
- Base of the stand is PP and the rod is coated in PE.
SKU: MP71333 -
-
General Laboratory
Oval Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Best suited for round bottom flask.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71316 -
-
General Laboratory
Coplin Jar
- These Coplin Jars are Polypropylene staining jars that holds either5 single or 10 back to back standard 75 x 25 mm slides.
- Interior of the Coplin Jar Is groved to hold the slides in an upright position.
- Flat Cap, features large milled edge for easy hand grip and has a built-in plug seal.
SKU: MP71329 -
General Laboratory
Magnetic Retrievers, PTFE/ALNICO V MAGNET
- Used to retrive stirrer bar.
- Innert & leak Free.
- Moulded in from FDA approved PTFE and LNICO V MAGNET.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71317 -
General Laboratory
Dual Purpose Scoop, HDPE
- ABDOS Dual purpose Scoop is designed to combine the function of a scoop, weigh boat, and funnel to make this product economically beneficial.
- These Scoops are made from high quality anti-static polystyrene that is waterproof and reduces the probability of materials sticking to the scoop.
- These scoops have locking tabs that help to retain materials.
- These scoops can withstand powders, gels, and semi-solids.
- The broad tip design keeps the scoop stable while on the scale and enables materials to be easily scooped and dispensed.
SKU: MP71339 -
General Laboratory
Burette Clamp, PP
• Burette clamps are used to hold burettes, test tubes, etc.
• Completely corrosion proof as it is moulded in polypropylene.
• Spring-loaded jack in the middle provides grip to the burette and prevents it from slipping.
• Two tapered wedges are provided to ensure firm grip on the rods.
• Available in both single and double clamp.
SKU: MP71323 -
-
General Laboratory
Triangular Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Ideal for mixing difficult solutions e.g. dissolving solvents or mixing sediments.
- Spins well giving the best possible mixing action.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71309 -
General Laboratory
Plain and Vacuum Desiccator, PP/CC
- Desiccators are enclosures containing desiccants for preserving moisture sensitive products.
- These desiccators are moulded-in from high quality plastics which is light and easy to handle.
- Silicone O-ring assures tight seal down to 0°C without using grease.
- Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting.
SKU: MP71325 -
General Laboratory
Plain Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
- Plain design for more turbulence at low speed.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71311 -
-