General Laboratory
Showing 1–24 of 46 results
-
General Laboratory
Plain Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
- Plain design for more turbulence at low speed.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71311 -
General Laboratory
Conical Flask, PP
• Moulded from high quality virgin Polypropylene to ensure excellent results.
• These Conical Flasks are used for routine storage and pouring applications in the laboratory.
• These Flasks have a screw cap designed with inner thread for superior sealing and better security.
SKU: MP71337 -
General Laboratory
Microscope Slide File, HIPS
- These Slide File will hold upto 20 standard microscope slides 25 x 75 mm.
- These slide file is made of two parts the base is holding the slides horizontally in prenumbered spaces for easy identification and transparent door which can either cover the slides and allow easy reading of ID labels with or without optical bar code reader.
SKU: MP71332 -
General Laboratory
Retort Stand, PP/PE Coated Rod
- Retort stand is used to attach clamp that holds test tubes and other equipment like burettes.
- It is used for titration, distillation and filtering of samples.
- It is available in both central and side holes.
- Base of the stand is PP and the rod is coated in PE.
SKU: MP71333 -
General Laboratory
Vacuum Guage Round / Cubic Desiccator
• These vacuum desiccators feature a round design with light weight yet high tensile strength.
• Maximum vacuum of 1 Torr (1.33 x 10-4 Mpa) for 72 hours.
• High quality silicone gasket ensures greaseless airtight seal for cost effective and clean test environment.
• Highly transparent, shatterproof, non-corrosive, and easy to clean polycarbonate construction.
SKU: MP71321 -
General Laboratory
Magnetic Retrievers, PTFE/ALNICO V MAGNET
- Used to retrive stirrer bar.
- Innert & leak Free.
- Moulded in from FDA approved PTFE and LNICO V MAGNET.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71317 -
General Laboratory
Volumetric flask. TPX, Class A
- These Volumetric Flasks are manufactured from the medical grade TPX polymer conforming to 21 CFR free of heavy metal and natural rubber.
- These Flasks are made from Glass like TPX offering excellent clarity.
- These Volumetric Flask Come with polypropylene stopper.
- Meet accuracy requirements of class A under “ISO 1042”.
SKU: MP71346 -
General Laboratory
Slide Drain Rack, HIPS
- This tray used as drain rack can hold upto 200 microscope slides in 100 individual numbered slots.
- All slides are stored upright for easier insertion and removal.
- To easily pick up the slide simply tilt the slides forward and backward with one finger.
SKU: MP71308 -
-
General Laboratory
Dual Purpose Scoop, HDPE
- ABDOS Dual purpose Scoop is designed to combine the function of a scoop, weigh boat, and funnel to make this product economically beneficial.
- These Scoops are made from high quality anti-static polystyrene that is waterproof and reduces the probability of materials sticking to the scoop.
- These scoops have locking tabs that help to retain materials.
- These scoops can withstand powders, gels, and semi-solids.
- The broad tip design keeps the scoop stable while on the scale and enables materials to be easily scooped and dispensed.
SKU: MP71339 -
General Laboratory
Plain and Vacuum Desiccator, PP/CC
- Desiccators are enclosures containing desiccants for preserving moisture sensitive products.
- These desiccators are moulded-in from high quality plastics which is light and easy to handle.
- Silicone O-ring assures tight seal down to 0°C without using grease.
- Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting.
SKU: MP71325 -
General Laboratory
Burette Clamp, PP
• Burette clamps are used to hold burettes, test tubes, etc.
• Completely corrosion proof as it is moulded in polypropylene.
• Spring-loaded jack in the middle provides grip to the burette and prevents it from slipping.
• Two tapered wedges are provided to ensure firm grip on the rods.
• Available in both single and double clamp.
SKU: MP71323 -
General Laboratory
Magnetic Stirrer Bar With Pivot Ring, PTFE/ALNICO V MAGNET
- Central pivot ring ensures efficient spinning even on curved or uneven bases.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71314 -
General Laboratory
Oval Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Best suited for round bottom flask.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71316 -
General Laboratory
Micro Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- For the stirring of liquids on magnetic stirrer and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
- For use in small vessels, e.g. test tubes, vials etc.
SKU: MP71310 -
-
General Laboratory
Separatory Funnel, PP
- ABDOS Separatory funnel is moulded from high quality virgin Polypropylene to ensure excellent clarity and strength.
- This Funnel is pear shaped and has screw cap for superior sealing and leak proof.
- This funnel comes with PTFE plug for easy usage.
- Push Fit Plugs make the assembly easy and convenient.
SKU: MP71345 -
General Laboratory
Beakers Without Handle, PP & TPX
• Manufactured in state of the art moulding facility using high purity virgin polypropylene (PP) & polymethylpentene (TPX).
• PP Material conforming to US FDA 21 CFR.
• TPX Material has distinct advantage of high transparency & chemical resistivity, also has higher thermal withstand capacity over PP beakers.
• Tapered stacking style saves space and makes it easy to handle.
SKU: MP71338 -
-
General Laboratory
Slide Staining System, Acetal
- This system has two components a square staining jar and a 12-position vertical slide rack.
- This system is made of acetal plastic and will not break like glass jars.
- Resist temperature between -150 ˚C to 121˚C
- Superior chemical resistance.
SKU: MP71307 -
General Laboratory
Drying Rack, SS
- These Drying Racks are used for draining and drying test tubes, beakers, flasks & other labware.
- There are 55 pegs in the rack, 50 smaller pegs for products with small diameter & 5 large brackets are designed to hold Erlenmeyer flasks, beakers, etc.
- These pegs are plastic coated for better protection.
- The racks come with a tray at the bottom in order to avoid drops on the surface or table.
SKU: MP71320