General Laboratory
Showing 1–24 of 46 results
-
General Laboratory
Slide Box, ABS
- These Slide Box are suitable for holding standard 25 x 75 mm microscope slides.
- Slide tray are mounted with cock sheet on the bottom and index list inside the lid for microscope slide identification.
- Uniform grooved slide slots seperates slides and prevents it to come in contact with each other.
SKU: MP71335 -
-
General Laboratory
Retort Stand, PP/PE Coated Rod
- Retort stand is used to attach clamp that holds test tubes and other equipment like burettes.
- It is used for titration, distillation and filtering of samples.
- It is available in both central and side holes.
- Base of the stand is PP and the rod is coated in PE.
SKU: MP71333 -
General Laboratory
Cross-spin Magnetic Stirrer Bars, PTFE/ALNICO V MAGNET
- Cross spin stirrer bars add speed and efficiency to your mixing requirements.
- The cross shape creates a deep vortex and provides stable and quite operation.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71319 -
General Laboratory
Cylindrical Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Plain design with rounded ends, suitable for a wide range of flat bottomed containers.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71313 -
General Laboratory
Octagonal Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
• Shape gives increased turbulence at low speeds.
• Bars with central pivot ring.
• For the stirring of liquids on magnetic stirrers and hot plates stirrers.
• Strong alloy magnets sheathed in pure white inert PTFE.
• Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71312 -
-
-
General Laboratory
Magnetic Stirrer Bar With Pivot Ring, PTFE/ALNICO V MAGNET
- Central pivot ring ensures efficient spinning even on curved or uneven bases.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71314 -
General Laboratory
Burette Clamp, PP
• Burette clamps are used to hold burettes, test tubes, etc.
• Completely corrosion proof as it is moulded in polypropylene.
• Spring-loaded jack in the middle provides grip to the burette and prevents it from slipping.
• Two tapered wedges are provided to ensure firm grip on the rods.
• Available in both single and double clamp.
SKU: MP71323 -
-
General Laboratory
Vacuum Guage Round / Cubic Desiccator
• These vacuum desiccators feature a round design with light weight yet high tensile strength.
• Maximum vacuum of 1 Torr (1.33 x 10-4 Mpa) for 72 hours.
• High quality silicone gasket ensures greaseless airtight seal for cost effective and clean test environment.
• Highly transparent, shatterproof, non-corrosive, and easy to clean polycarbonate construction.
SKU: MP71321 -
General Laboratory
Slide Storage System, HIPS
- The most convenient, organized and versatile way of storing 75 x 25 mm microscope slides.
- Slide storage system includes a slide box and a removable tray & transparent hinged cover makes the contents of the box easy to see at a glance.
- Can withstand temperature between – 80 ˚C to + 80 ˚C.
- All slides are stored upright for easier insertion and removal. To easily pick up the slide simply tilt the slides forward and backward with one finger.
SKU: MP71306 -
General Laboratory
Plain and Vacuum Desiccator, PP/CC
- Desiccators are enclosures containing desiccants for preserving moisture sensitive products.
- These desiccators are moulded-in from high quality plastics which is light and easy to handle.
- Silicone O-ring assures tight seal down to 0°C without using grease.
- Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting.
SKU: MP71325 -
General Laboratory
Slide Drain Rack, HIPS
- This tray used as drain rack can hold upto 200 microscope slides in 100 individual numbered slots.
- All slides are stored upright for easier insertion and removal.
- To easily pick up the slide simply tilt the slides forward and backward with one finger.
SKU: MP71308 -
General Laboratory
Triangular Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Ideal for mixing difficult solutions e.g. dissolving solvents or mixing sediments.
- Spins well giving the best possible mixing action.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71309 -
General Laboratory
Spatula, PP
- Abdos Spatula is moulded in polypropylene.
- Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
- The edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from containers.
- Suitable for use with food.
SKU: MP71347 -
General Laboratory
Weighing Boats, PS
- Abdos weighing boats are flexible with smooth surfaces to provide accurate pour-outs with minimal sample loss.
- Biologically inert and resistant to dilute weak acids, aqueous solutions, alcohols, and bases.
- All Abdos weighing boats are anti-static and facilitate the weighing of the static-affected sample.
- These boats can withstand temperature between 10°C to 70°C.
- Can be used with microwave moisture analysers.
SKU: MP71350 -
General Laboratory
Beakers Without Handle, PP & TPX
• Manufactured in state of the art moulding facility using high purity virgin polypropylene (PP) & polymethylpentene (TPX).
• PP Material conforming to US FDA 21 CFR.
• TPX Material has distinct advantage of high transparency & chemical resistivity, also has higher thermal withstand capacity over PP beakers.
• Tapered stacking style saves space and makes it easy to handle.
SKU: MP71338 -
General Laboratory
Measuring Cylinder, TPX Class “A”
- These transparent graduated cylinders have excellent value.
- Moulded-in large, neat and easy to read graduations.
- Hexagonal shape gives stability to the base.
- Cylinders have generous pour spout for smooth flow of liquid during pouring.
- Meet accuracy requirements of class A under “DIN 12681/ISO 6706”.
SKU: MP71349