Product Details:
Charging Time: Less Than 8 seconds
Brand: Allied Medical
Weight: 4.5 Kgs.
Display: 320 x 240 pixels,5.7” Blue LCD with LED backlit
Dimensions: H180 x W230 x D210mm (max.) without Paddle
Display Area: 120mm x 90mm
Operating Mode: Manual
Energy: 2 to 200 joules in 12 steps
Waveform: Biphasic
Synchronous: Energy delivery begins within 60 ms of the QRS Peak
Check Mode: Manual test mode,Prints the status of
ECG Frequency Response: 0.5 Hz to 40 Hz (ECG),0.5 Hz to 30 Hz (Paddle)
ECG Patient isolation: Optical isolation
ECG Lead selection: Lead I,II and III
ECG Gain setting: 0.5,1.0 and 2.0
CMRR: Greater Than 90 db
ECG Sweep Speed: 12.5,25.0,50.0 mm/sec
ECG Waveform: 1 ECG,2 is 4sec delayed (cascaded)
ECG Data Output: Analog output of ECG
ECG Digital filter: Digital signal processing for good quality of ECG
ECG Freeze mode: To freeze last 4 seconds ECG
Range: 30-250 BPM
Accuracy: +/- 2 BPM
Resolution: 1 BPM
Tone: Beep on every QRS detected
Low alarm Limit Range: 30-245 (step of 5)
High alarm Limit Range: 40-250 (step of 5)
Paper Type: Thermal paper 50/55 mm width,20 meters length
ECG in Defib Mode: Prints 5 Seconds pre & post ECG
Print Annotates: Time,Date,ECG Lead,Mode,Shock Status & selected Energy
Delay: 10 Seconds
Input: 150-276VAC,50Hz,60Hz,12V DC for ambulance
Output: 17V at 4A
Battery: 12V/3.8 Ah Rechargeable
Back up time: 3 hours min on full charge in ECG mode /50 shock of 150 Joules in defib mode
Power consumption: 30 Watts (max) in ECG mode
Operating Temp: (-)5 Degree C,(+)50 Degree C
Heart Rate Humidity: Up to 95 % non-condensing
Specification
Features:
- Offer variable energy level selection. (2, 3, 5,7, 10, 20, 30, 50, 70, 100, 150, 200 Joules)
- Battery capacity – 50 shocks on the single charge.
- Adult & pediatric paddles support.
- Compact & Light weight : Approx.4.5 Kgs.
- Printer
- Optional: Non invasive pacing, SPO2 , NIBP, AED.
Other Details:
Defibrillator:
Paddle Assembly: External paddle assembly with coil retractable high voltage cable Adults & Pediatric paddle integrated to the same handle
Printer:
- Defib Mode: Stores & prints 10 Seconds of Defib Shock data i.e. 5 seconds pre-critical & 5 seconds post critical Maximum events that can be store Memory of 10
- Print Annotates: Time, Date, ECG Lead, Mode, Shock Status & selected Energy
- Power Supply (AC Mains Through Adaptor):
- Backup time: 3 hours min on the full charge in ECG mode /50 shocks of 150 Joules in defib mode
Optional:
- Non-Invasive Pacing
- SPO2
- NIBP
- AED
- EtCO2 Monitoring
- 360 J Energy