Philips Respironics Dreamstation Auto BiPAP

SmartRamp – maintains a constant lower pressure until the device detects that you require more pressure.

The user screen and control knob is located on the edge of the machine making it easier to read and control while in bed.

The DreamStation has a built-in sensor to detect ambient light and dims the screen in a dark room while brightening when the room has lights on.

Opti-Start – monitors the average pressure needed and begins therapy at that pressure.

Heated Humidifier water chamber is accessible from the top of the machine making it easier to remove, fill and replace in the BiPAP.
Specification

Modes – CPAP, S, Auto BiPAP
Ventilation Pressure – UPto 25cm H20
Breaths per minute – 1 to 30 (the increment is 1 breath)
Ventilation Features – Digital Auto-Trak, No settings – fully automated triggering cycling and leak compensation
Automated Airway Management (AAM) – Max. EPAP: 4 to 25 cm H2O, Min. EPAP: 4 to 25 cm H2O, Pressure Support: 0 to 25 cm H2O
Inspiration Time – 0.5 to 3.00 seconds (the increment is 0.1 seconds)
Rise Time – 1 to 6
Ramp Time – 5 to 40 minutes (the increment is 5 minutes)
Flex Pressure Relief – 0 to 3 (only in S-mode)
Data storage capacity (minimum) – SD card: 6 months, Onboard: 3 months
Filters – Reusable pollen; disposable ultra- fine
Device controls – LCD, control dial/push button
Humidification (Optional) – Heated humidification, fixed, adaptive (standard 15mm or 15 mm heated tube)
Dimensions – 15.7 x 19.3 x 8.4 cm (w/o humidifier), 29.7 x 19.3 x 8.4 cm (w/ humidifier)
Weight – 1.33 kg/2.94 lbs (w/o humidifier), 1.98 kg/4.37 lbs (w/ humidifier) including power supply
Electrical requirements – 100 – 240 VAC, 50/60 Hz, 2.0- 1.0 A