Stasis Multipara Connected Care Central Monitoring System

“Up to 75% of hospital deaths

occur in unmonitored settings

outside of the ICU.”

Stasis is built to prevent

these deaths.

The Stasis Monitor

Bedside Monitoring. Redefined.

Stasis measures six key vital signs in a single monitor with an intuitive display: green is good, yellow needs attention.

The Stasis Tablet

Centralized Monitoring. Without the wires.

Stasis connects to all the monitors in the ward to automatically document vital signs to increase nursing productivity.

The Stasis App

Remote Monitoring. In your pocket.

Stasis streams real-time waveforms, high resolution patient charts, and powerful notifications to a clinicians smartphone.

Specification

System Overview

• Year Launched : 2017
• Regulatory clearences: USFDA-cleared (510k cleared); ISO-3845

Stasis Monitor

• Dimensions (cm) : 13.3cm(T) X 10.3cm(W) X 7.2cm(D)
• Weight: 2.43lbs(1.1Kg)
• Protection: Class II Type CF – Defibrillation Protected
• Display Size: 15 cm (6”) diagonal
• Network Type: IEEE 802.11 b/g/n & Bluetooth Low Energy
• Probe Ports:4 (SpO2, ECG, NIBP, Temperature)
• Battery: Yes, rechargeable; 2 hours to full charge
• Battery back-up : minimum 5 hours
• Vitals: Pulse rate, Pulse oximetry (SpO2), 3-lead ECG, Respiratory rate, Non-invasive Blood pressure, Skin temperature

Stasis Tablet:

• Display: 8”-10″ display
• Resolution: 1280*800
• Tablet Battery: Li-Po 5100 mAh rechargeable
• Security: Locked to Stasis software; Physical tablet lock

INTERNATIONAL STANDARDS

Regulatory clearences: USFDA-cleared (510k cleared); ISO-3845

Electrical Safety

• Meets IEC 60601-1: Medical electrical equipment – Part 1:
• General requirements for basic safety and essential performance

Alarm System

• Meets IEC 60601-1-8: Medical electrical equipment – Part 1-8:
• General requirements for basic safety and essential performance – Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

Patient Monitoring Safety

• Meets IEC 60601-2-49: Medical electrical equipment – Part 2-49:
• Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment

Electromagnetic Compatibility

• Meets IEC 60601-1-2: Medical electrical equipment – Part 1-2:
• General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic disturbances – Requirements and tests

SPO2 Safety, Quality, & Accuracy

• Meets IEC 80601-2-61: Medical electrical equipment – Part 2-61:
• Particular requirements for basic safety and essential performance of pulse oximeter equipment

NIBP Safety, Quality, & Accuracy

• Meets IEC 80601-2-30: Medical electrical equipment – Part 2-30:
• Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers

ECG Safety, Quality, & Accuracy

• Meets IEC 60601-2-27: Medical electrical equipment – Part 2-27:
• Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment

TEMP Safety, Quality, & Accuracy

• Meets IEC 80601-2-56: Medical electrical equipment – Part 2-56:
• Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement

Wireless Compatibility

• FCC Part 15 Subpart C 15.247, ANSI C63.10- 2013

Dust & Water Resistance

• IP22 rating