General Laboratory
Showing 1–24 of 46 results
-
General Laboratory
Retort Stand, PP/PE Coated Rod
- Retort stand is used to attach clamp that holds test tubes and other equipment like burettes.
- It is used for titration, distillation and filtering of samples.
- It is available in both central and side holes.
- Base of the stand is PP and the rod is coated in PE.
SKU: MP71333 -
General Laboratory
Slide Box, ABS
- These Slide Box are suitable for holding standard 25 x 75 mm microscope slides.
- Slide tray are mounted with cock sheet on the bottom and index list inside the lid for microscope slide identification.
- Uniform grooved slide slots seperates slides and prevents it to come in contact with each other.
SKU: MP71335 -
General Laboratory
Slide Storage System, HIPS
- The most convenient, organized and versatile way of storing 75 x 25 mm microscope slides.
- Slide storage system includes a slide box and a removable tray & transparent hinged cover makes the contents of the box easy to see at a glance.
- Can withstand temperature between – 80 ˚C to + 80 ˚C.
- All slides are stored upright for easier insertion and removal. To easily pick up the slide simply tilt the slides forward and backward with one finger.
SKU: MP71306 -
General Laboratory
Magnetic Retrievers, PTFE/ALNICO V MAGNET
- Used to retrive stirrer bar.
- Innert & leak Free.
- Moulded in from FDA approved PTFE and LNICO V MAGNET.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71317 -
General Laboratory
Spatula, PP
- Abdos Spatula is moulded in polypropylene.
- Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
- The edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from containers.
- Suitable for use with food.
SKU: MP71347 -
-
General Laboratory
Triangular Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Ideal for mixing difficult solutions e.g. dissolving solvents or mixing sediments.
- Spins well giving the best possible mixing action.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71309 -
General Laboratory
Dual Purpose Scoop, HDPE
- ABDOS Dual purpose Scoop is designed to combine the function of a scoop, weigh boat, and funnel to make this product economically beneficial.
- These Scoops are made from high quality anti-static polystyrene that is waterproof and reduces the probability of materials sticking to the scoop.
- These scoops have locking tabs that help to retain materials.
- These scoops can withstand powders, gels, and semi-solids.
- The broad tip design keeps the scoop stable while on the scale and enables materials to be easily scooped and dispensed.
SKU: MP71339 -
General Laboratory
Weighing Boats, PS
- Abdos weighing boats are flexible with smooth surfaces to provide accurate pour-outs with minimal sample loss.
- Biologically inert and resistant to dilute weak acids, aqueous solutions, alcohols, and bases.
- All Abdos weighing boats are anti-static and facilitate the weighing of the static-affected sample.
- These boats can withstand temperature between 10°C to 70°C.
- Can be used with microwave moisture analysers.
SKU: MP71350 -
-
General Laboratory
Slide Staining System, Acetal
- This system has two components a square staining jar and a 12-position vertical slide rack.
- This system is made of acetal plastic and will not break like glass jars.
- Resist temperature between -150 ˚C to 121˚C
- Superior chemical resistance.
SKU: MP71307 -
-
-
General Laboratory
Plain Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
- Plain design for more turbulence at low speed.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71311 -
General Laboratory
Drying Rack, SS
- These Drying Racks are used for draining and drying test tubes, beakers, flasks & other labware.
- There are 55 pegs in the rack, 50 smaller pegs for products with small diameter & 5 large brackets are designed to hold Erlenmeyer flasks, beakers, etc.
- These pegs are plastic coated for better protection.
- The racks come with a tray at the bottom in order to avoid drops on the surface or table.
SKU: MP71320 -
General Laboratory
Slide Drain Rack, HIPS
- This tray used as drain rack can hold upto 200 microscope slides in 100 individual numbered slots.
- All slides are stored upright for easier insertion and removal.
- To easily pick up the slide simply tilt the slides forward and backward with one finger.
SKU: MP71308 -
General Laboratory
Coplin Jar
- These Coplin Jars are Polypropylene staining jars that holds either5 single or 10 back to back standard 75 x 25 mm slides.
- Interior of the Coplin Jar Is groved to hold the slides in an upright position.
- Flat Cap, features large milled edge for easy hand grip and has a built-in plug seal.
SKU: MP71329 -
General Laboratory
Cross-spin Magnetic Stirrer Bars, PTFE/ALNICO V MAGNET
- Cross spin stirrer bars add speed and efficiency to your mixing requirements.
- The cross shape creates a deep vortex and provides stable and quite operation.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71319 -
General Laboratory
Conical Flask, PP
• Moulded from high quality virgin Polypropylene to ensure excellent results.
• These Conical Flasks are used for routine storage and pouring applications in the laboratory.
• These Flasks have a screw cap designed with inner thread for superior sealing and better security.
SKU: MP71337 -
General Laboratory
Magnetic Stirrer Bar With Pivot Ring, PTFE/ALNICO V MAGNET
- Central pivot ring ensures efficient spinning even on curved or uneven bases.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71314 -