General Laboratory
Showing 1–24 of 46 results
-
General Laboratory
Slide Box, ABS
- These Slide Box are suitable for holding standard 25 x 75 mm microscope slides.
- Slide tray are mounted with cock sheet on the bottom and index list inside the lid for microscope slide identification.
- Uniform grooved slide slots seperates slides and prevents it to come in contact with each other.
SKU: MP71335 -
General Laboratory
Vacuum Guage Round / Cubic Desiccator
• These vacuum desiccators feature a round design with light weight yet high tensile strength.
• Maximum vacuum of 1 Torr (1.33 x 10-4 Mpa) for 72 hours.
• High quality silicone gasket ensures greaseless airtight seal for cost effective and clean test environment.
• Highly transparent, shatterproof, non-corrosive, and easy to clean polycarbonate construction.
SKU: MP71321 -
General Laboratory
Slide Staining System, Acetal
- This system has two components a square staining jar and a 12-position vertical slide rack.
- This system is made of acetal plastic and will not break like glass jars.
- Resist temperature between -150 ˚C to 121˚C
- Superior chemical resistance.
SKU: MP71307 -
General Laboratory
Drying Rack, SS
- These Drying Racks are used for draining and drying test tubes, beakers, flasks & other labware.
- There are 55 pegs in the rack, 50 smaller pegs for products with small diameter & 5 large brackets are designed to hold Erlenmeyer flasks, beakers, etc.
- These pegs are plastic coated for better protection.
- The racks come with a tray at the bottom in order to avoid drops on the surface or table.
SKU: MP71320 -
General Laboratory
Measuring Cylinder, TPX Class “A”
- These transparent graduated cylinders have excellent value.
- Moulded-in large, neat and easy to read graduations.
- Hexagonal shape gives stability to the base.
- Cylinders have generous pour spout for smooth flow of liquid during pouring.
- Meet accuracy requirements of class A under “DIN 12681/ISO 6706”.
SKU: MP71349 -
General Laboratory
Octagonal Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
• Shape gives increased turbulence at low speeds.
• Bars with central pivot ring.
• For the stirring of liquids on magnetic stirrers and hot plates stirrers.
• Strong alloy magnets sheathed in pure white inert PTFE.
• Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71312 -
General Laboratory
Coplin Jar
- These Coplin Jars are Polypropylene staining jars that holds either5 single or 10 back to back standard 75 x 25 mm slides.
- Interior of the Coplin Jar Is groved to hold the slides in an upright position.
- Flat Cap, features large milled edge for easy hand grip and has a built-in plug seal.
SKU: MP71329 -
General Laboratory
Cross-spin Magnetic Stirrer Bars, PTFE/ALNICO V MAGNET
- Cross spin stirrer bars add speed and efficiency to your mixing requirements.
- The cross shape creates a deep vortex and provides stable and quite operation.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71319 -
General Laboratory
Spatula, PP
- Abdos Spatula is moulded in polypropylene.
- Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
- The edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from containers.
- Suitable for use with food.
SKU: MP71347 -
General Laboratory
Oval Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Best suited for round bottom flask.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C.
SKU: MP71316 -
General Laboratory
Separatory Funnel, PP
- ABDOS Separatory funnel is moulded from high quality virgin Polypropylene to ensure excellent clarity and strength.
- This Funnel is pear shaped and has screw cap for superior sealing and leak proof.
- This funnel comes with PTFE plug for easy usage.
- Push Fit Plugs make the assembly easy and convenient.
SKU: MP71345 -
General Laboratory
Microscope Slide File, HIPS
- These Slide File will hold upto 20 standard microscope slides 25 x 75 mm.
- These slide file is made of two parts the base is holding the slides horizontally in prenumbered spaces for easy identification and transparent door which can either cover the slides and allow easy reading of ID labels with or without optical bar code reader.
SKU: MP71332 -
General Laboratory
Wings Magnetic Stirrer Bar, PTFE/ALNICO V MAGNET
- Best suited for test tubes.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures upto 260°C.
SKU: MP71318 -
General Laboratory
Plain Magentic Stirrer Bar, PTFE/ALNICO V MAGNET
- Plain design for more turbulence at low speed.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71311 -
-
General Laboratory
Conical Flask, PP
• Moulded from high quality virgin Polypropylene to ensure excellent results.
• These Conical Flasks are used for routine storage and pouring applications in the laboratory.
• These Flasks have a screw cap designed with inner thread for superior sealing and better security.
SKU: MP71337 -
General Laboratory
Magnetic Retrievers, PTFE/ALNICO V MAGNET
- Used to retrive stirrer bar.
- Innert & leak Free.
- Moulded in from FDA approved PTFE and LNICO V MAGNET.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71317 -
-
General Laboratory
Workstation storage/ Dispenser Bin, ACRYLIC
- Ideal for storing and dispensing small laboratory product such as Pipette tips, Pasture Pipette, Micro Centrifuge Tubes.
- Removable top cover allows easy filling in to the box.
- Hinged opening at the front to take out items from the bin.
- Holes at the back of the bin help it to be placed or stuck on to the wall.
SKU: MP71327 -
General Laboratory
Magnetic Stirrer Bar With Pivot Ring, PTFE/ALNICO V MAGNET
- Central pivot ring ensures efficient spinning even on curved or uneven bases.
- For the stirring of liquids on magnetic stirrers and hot plates stirrers.
- Strong alloy magnets sheathed in pure white inert PTFE.
- Resistant to virtually all chemical attack and temperatures up to 260°C
SKU: MP71314